Hefei Yamei Technology Co., Ltd.
Hefei Yamei Technology Co., Ltd. Innovation+Quality+Service
Add to Cart
Self Propelled Scissor Lift Aerial Work Platform 5.8m Hydraulic Drive
Yamei self-propelled hydraulic and electric scissor lifts are designed to
improve human aerial working condition.
Excellent for both indoor&outdoor construction, they’re operated ideally
in tight space making it’s easy for any maintenance and installation applications
Application
Factory construction
Painting
Maintenance work
General overhead work
It is widely used for aerial installation and maintenance of the working sites without power supply and with smooth working grounds, such as hotels, grand hall, sport stadium, large factory, workshops, warehouse, granary,bus/railway stations, hotels,airports, gas station and aerial pipeline
Introduction:
1. The scissors lift tables storage battery as the power source, and makes low noise and no emission when working, so it can be used in indoor occasions such as workshops, warehouses, hotels, etc.
2. Larger working space: The platform can extend on one side, which can enlarge the working space.
3. Swing-out battery box and power module trays allow easy access to engine components for convenient service
4.Scissor platforms offer up to 25% gradeability when driving on slopes with safety protection.
5. Control box: there are control box not only on the platform but also on the chassis, easy to control.
6. Safety bar: The safe bar helps to support the unit as a duplicate protection when the machine need some maintenances.
7. Battery with charger: Trojan brand, import from USA, better service than normal battery.
8. Hydraulic motor: The hydraulic motor support the 2-front wheel driving with oil inlet pipe and oil outlet pipe conveying oil.
Standard features
● Proportional control
● Automatic Pothole Guard System
● Solid non-marking tires
● Auto brake system
● Emergency platform lowering system
● Emergency stop button
● Hour meter
● Electronic horn
● Extension platform
● Descent alarm
● Descent protection
● Tilt protection system
● Folding rails
● Protection bar around chassis
● Cylinder holding valve
● Onboard diagnostic system
● Flashing Beacon
● Motion Alarm
| Production Specification | JCPT0807HD |
| Measurement | |
| Working Height Max. | 7.8m |
| A Platform Height Max. | 5.8m |
| B Platform Height Stowed | 1.81m |
| C Platform Length-outside | 1.81m |
| Extended | 2.71m |
| Slide-out Platform extension deck | 0.90m |
| D Platform Width | 0.81m |
| E Height-stowed: guardrail raised | 2.10m |
| F Length-Stowed | 1.83m |
| G Width | 0.87m |
| H Wheel Base | 1.32m |
| I Ground Clearance | 10cm |
| J With Pothole Guards Deployed | 1.9cm |
| Productivity | |
| Max. Platform Occupancy | 2 |
| Lift Capacity | 230kgs |
| Drive speed-stowed | 4.0km/h |
| Drive speed-Raised | 0.8km/h |
| Gradeability | 25% |
| Max. Tilt | 3°/ 1.5° |
| Turning Radius(inside) | 0 |
| Turning Radius(outside) | 1.71 |
| Raise/lower speed | 18/22sec |
| Non-marking tires | Φ305×100 |
| Power | |
| Power Source | 24V/3.3KW |
| Battery | 4x6V/225Ah |