
Add to Cart
Scissor Lift Aerial Working Platform Lift Height 10m Working Height 12m Self Propelled
Applications
It is widely used for aerial installation and maintenance of the working sites without power supply and with smooth working grounds, such as hotels, grand hall, sport stadium, large factory, workshops, warehouse, granary,bus/railway stations, hotels,airports, gas station and aerial pipeline
Standard features
● Proportional control
● Automatic Pothole Guard System
● Solid non-marking tires
● Auto brake system
● Emergency platform lowering system
● Emergency stop button
● Hour meter
● Electronic horn
● Extension platform
● Descent alarm
● Descent protection
● Tilt protection system
● Folding rails
● Protection bar around chassis
● Cylinder holding valve
● Onboard diagnostic system
● Flashing Beacon
● All Motion Alarm
Production Specification
Production Specification | JCPT1212HD |
Measurement | |
Working Height Max. | 12m |
A Platform Height Max. | 10m |
B Platform Height Stowed | 1.93m |
C Platform Length-outside | 2.43m |
Extended | 3.33m |
Slide-out Platform extension deck | 0.90m |
D Platform Width | 1.15m |
E Height-stowed: guardrail raised | 2.44m |
F Length-Stowed | 2.43m |
G Width | 1.21m |
H Wheel Base | 1.87m |
I Ground Clearance | 10cm |
J With Pothole Guards Deployed | 1.9cm |
Productivity | |
Max. Platform Occupancy | 2 |
Lift Capacity | 320kgs |
Drive speed-stowed | 3.5km/h |
Drive speed-Raised | 0.8km/h |
Gradeability | 25% |
Max. Tilt | 3°/ 2° |
Turning Radius(inside) | 0 |
Turning Radius(outside) | 2.33 |
Raise/lower speed | 45/36sec |
Non-marking tires | Φ381×127 |
Power | |
Power Source | 24V/3.3KW |
Battery | 4x6V/225Ah |